Fluorocarbon Coating for Exterior Walls
December 19, 2007 – 11:36 pmFluorocarbon Coating for Exterior Walls
Description: Osland Fluorocarbon Coating for Exterior Walls is prepared with top-grade metallic pigment, imported high performance fluorocarbon resin, non-yellowing and full-gloss polyurethane resin and imported high-quality activator, exactly a top-grade outdoor paint with superior anti-weathering performance and excellent ornamental effects of metallic surface based on American advanced compounding formula, techniques and overseas-introduced high performance materials.
Use: For high-grade decoration of exterior walls and roofs of the high-rise buildings and super high-rise buildings. Also applicable to new or old concrete interior and exterior walls, and face lifting of cement, tile, mosaic surface and old aluminum curtain walls.
Appearance: High grade, luxury, metallic luster, effects of imitated clad metal sheet by lattice
Color: Silvery white, golden yellow and other colors according to our color schemes
Characteristics: Excellent weathering resistance, especially that to acid rain, water, stain and chalking; strong adherence; paint film full and bright with good sunlight resistance and gloss retention, and service life up to 20 years.
Directions for Use
1、Level substrate, water content < 10％, PH <10;
2、Adopt Osland’s alkali-resistant seal primer for bottoming by brush, roller or spray;
3、Spray Osland metallic paint on the primer the next day, using 0.20-0.25 kg/㎡. Adjust the paint’s viscosity to 18-20s (QND-4) with special thinner according to requirements.
4、Spray coating is under the conditions described in the form below:
|
Condition/Method
|
Hand spray coating
|
|
Spray viscosity
|
18-20s (QND-4)
|
|
Spray gun distance
|
20-250cm
|
|
Spray gun pressure
|
3-4Kg/m2
|
|
Spray gun caliber
|
1.1-1.3mm
|
|
Normal temperature drying
|
Re-spray until the surface gets dry |
Points for Attention:
1、Use of Osland fluorocarbon special high-intensity light-absorbing putty is recommended;
2、Once the pot of metallic paint is opened, it shall be churned up evenly before use;
3、The storage period of the metallic paint is one year. Do use it up within one year in case that quality is impaired;
4、Metallic paint shall be airtight stored in a dry and cool place. Enough attention shall be paid to the prevention from water, leakage, sunshine and high temperature, and safe long distance from fire causes shall be ensured.
Packing: 5kl
web link:www.osland.cn
